Receptor de Satélite
DREAMBOX 500S (FTA CA PATCH Cardsharing)
El
DREAMBOX 500S es el primer receptor de DVB basado en Linux. Este receptor se ejecuta el software de código abierto desarrollado por cientos de desarrolladores en todo el mundo. El
DREAMBOX es la máquina FTA mas avanzada del Mundo. Tiene muchas Diferentes clase de software que pueden aplicarse para hacer la experiencia y necesidades del usuario y es completamente personalizable. Si estás
buscando una unidad muy poderosa, y algo para divertirse, esta es la unidad para ti.
Esta unidad tiene un EPG avanzado y además cuenta grabación de vídeo IP PVR. Además usted puede conectar esta unidad a la red basada en Windows en casa y grabar tus programas de TV directamente a su disco duro.
Este receptor no requiere dongle , ya que cuenta con su puerto Ethernet No requiere intervencion del usuario , solo conectalo y a ver TV . Cambio rapido de canal gracias a su potente procesador Guia de canales hasta 7 dias Actualmente trabajando con sat 110 y 119 En un futuro se espera integrar mas sistemas a este mismo receptor No requiere pc de intermediario para transmitir la señal. Contiene mas canales que cualquier otro sistema IKS que este en el mercado DM 500-S de Linux es el más pequeño receptor de TV por satélite, con 1 x Smartcard-Reader en el mercado.
250 MHz IBM PowerPC Processor (350 Mips) 2 LED status Linux Operating System Full automatic service scan Supports directly bouquet-lists (indirect unlimited) Supports multiple LNB-Switching control (supports DiSEqC) 1 x Smartcard-Reader Unlimited channel lists for TV/Radio SPDI/F nterface for digital bit stream out (AC-3 / DTS) MPEG2 Hardware decoding Channel-change time < 1 second Fully adaptable OSD in many languages (skin-support) 100Mbit full duplex Ethernet Interface Supports EPG (electronic program guide) 1 x Scart-interfaces (fully controlled by software) Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video parameter:
Input Level FBAS 1 Vss /- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:
Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC /- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Power consumption:
< 10W / 12V
Input voltage:
DC12V,alternating acurrent /- 15%
Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A
Others:
Ambient Temperature 15°C... 35°C
Humidity < 80